Home
About Us
Maintenance Concerns
Cylindrical vs. Disk
American Lincoln
R.P.S. Factory Cat
Nilfisk Advance
MADVAC Vacuums
Value Machines
Refurbished Machines
Rentals
Detergents
Parts & Service
Contact Us

 

New Location

Caliber Equipment, Inc.

11482 Fox Cross Rd.

Ashland, VA 23005

 

E-Mail

Calibereq@aol.com

 

Back to Advance Model List

Nilfisk Advance industrial sweeper scrubber authorized distributor

Model 5200 battery operated rider sweeper

This is variable dump sweeper with a 52 inch total cleaning path.  Quiet and clean battery operation allows this machine to be used where fumes and noise would prohibit combustion engine use.  The batteries will operate the sweeper for up to 4 hours.  Many warehouses may be swept in this amount of time.  A 4.6 foot cubic hopper will hold up to 242 pounds and dump into a 55 inch tall container.   The top loaded hopper holds plenty of pallet chips, paper, and dust.  A 75 square foot paper panel filter is relatively big for a machine of this size.  A felt filter is also available.

bullet52 inch sweep path, battery operated
bulletIndependent, dual side brooms for maximum productivity
bulletHydraulic debris hopper can be dumped at 4.6 feet
bulletTools-free removable main broom and filter
bulletWill sweep up a 20% grade

Size: The Advance 5200 is actually smaller than the Advance 4600 in terms of the main broom path.  The 5200 has a 31.5" main broom compared to the 4600's 34" main broom.  Your choice may be influenced by the need to keep the side brooms up in very dusty applications.  (Both machines have side brooms with no dust control.)

Larger than its' "cousin" the Advance 1100, it still offers the same design advantages seen with front positioned operators.  But the high dump hopper will allow you to dump into portable dump carts instead of having to manually pick up the dumped debris like with the 1100. 

Design: This "over throw" sweeper design is excellent for warehouse applications where light debris such as pallet chips, paper tags, and plastic "peanuts" are prevalent.  It has a litter flap design that lifts off of the floor when the operator steps on a pedal in the operator compartment.  This allows access to the broom chamber for larger items and light debris.

"over throw" versus the "forward throw" design

Light debris can often be trapped in front of the hopper flaps on the "forward throw" design seen on the Advance 6250 and 4600.  It is common for the operator to try to find rough spots on the floor to create enough friction to get this debris into the broom chamber.  Counter balancing this is the forward throw design's ability to "shoot" heavy sand and rocks straight, (and effectively), into the hopper rather than over the top of the main broom. (overthrow system) 

Price: Over $15,000.00

©2003-2006 Caliber Equipment, Inc.  All Rights Reserved

Caliber Equipment Nilfisk Advance Industrial and Commercial Floor Scrubbers