Home
About Us
Maintenance Concerns
Cylindrical vs. Disk
American Lincoln
R.P.S. Factory Cat
Nilfisk Advance
MADVAC Vacuums
Value Machines
Refurbished Machines
Rentals
Detergents
Parts & Service
Contact Us

 

New Location

Caliber Equipment, Inc.

11482 Fox Cross Rd.

Ashland, VA 23005

 

E-Mail

Calibereq@aol.com

 

Back to Model List

Nilfisk Advance industrial sweeper scrubber authorized distributor

Exterra variable dump rider sweeper  See pictures below

 

Appropriate for EXTREMELY dusty conditions!  Exterra Sweepers!

Nilfisk Advance Exterra model rider sweeper.  This is a heavy duty combustion engine powered rider sweeper.  It sweeps a 65 inch wide path with its' standard right hand side broom.  It covers up to 258,000 square feet per hour.  A 2nd side broom is available for even greater productivity.  The cylindrical main broom throws heavy and light debris forward into a large hydraulically actuated, 14 cubic foot, debris hopper.   Air passes through a water resistant dust filter to capture dust before it is exhausted back into the environment.  A unique (optional) dust control system uses a moist fog to suppress any dust generated by the side brooms.  The Hi-Dump hopper raises collected debris up to 60 inches, allowing for disposal into standard size dumpsters.

Ø      The Exterra has an 11% per cent wider main broom than previous warehouse and parking lot sweepers in this classification, yet it still maintains its maneuverability. This can reduce your operator’s operating time further reducing your overall costs.

Ø      Dust control is always an issue with a broom sweeper.  Advance has added new features which make this sweeper both suitable for facility maintenance or outside surface maintenance.  A new highly effective dust filter system and an (optional) fog dust suppression system will allow this sweeper to be used effectively in extremely dry or extremely wet conditions.

Ø      Excellent field of vision. An Advance trademark, the offset hopper provides a clean line of sight for the operator to see the front corner of the sweeper.  Compare this feature to competing machines where blind spots exist across the front corner of the sweeper.  You will damage fewer products and reduce inventory shrinkage.

 

Standard Equipment Includes

 

 

 

 

* 65" Sweep Path

* Brooms off in Neutral

 

 

* 77" Sweep Path with Dual Side Brooms

* One Touch Sweeping

 

 

* MaxAccess for Easy Access to Engine

* 60" High Dump Hopper

* Clear View Hopper gives operator view of critical areas

* 14 cu. ft. Hopper

 

 

* Engine Returns to Idle after 15 sec. of inactivity

* 50" Main Broom

 

 

* DustGuard option for Dust Free Sweeping

* Interlocking Covers for Safety

* 88 sq. ft. UltraWeb™ Spunbond Nanofiber Dust Filter

* 21" 10 ply Front Tires

 

 

* Touch Pad Controls

* 18" 8 ply Rear Tire

 

 

* Structural Roto Mold Hopper with 5 mph Bumper

* 24" or 26" Side Brooms

 

 

Engines

 

 

 

* Water Cooled 4 Cyl, 56 HP GM  Gas/LP Engine

* Kubota 35.5 hp Diesel Engine

* Water Cooled 3 Cyl, 31 HP Kubota Gas/LP Engine

 

 

 

 

 

 Warranty

 

 

 

 

* 6 Months Labor/180 Days Travel

* 4 Years/2,800 hours Parts

* 8 Years on Rotomold Components

 

 

 

 

 Pricing $27,000 to $35,000

Navigation tip.  Clicking on the thumbnail picture increases the detail and size of the picture.

 

 

 
 
 

©2003-2007 Caliber Equipment, Inc.  All Rights Reserved

Caliber Equipment Nilfisk Advance Industrial and Commercial Floor Scrubbers