New Location

Caliber Equipment, Inc.

11482 Fox Cross Rd.

Ashland, VA 23005

E-Mail

Calibereq@aol.com

R.P.S. Corp.

Special features: (see our pictures below for confirmation)

	36 volt battery pack (6) six volt batteries
	>for longer run times.
	Oversized lid permits thorough cleaning
	>better smelling recovery tanks.
	>Allows you to keep your equipment sanitary .
	Debris basket screens material directly from the squeegee hose before it enters the recovery tank.
	> avoids clogged floor drains
	Machine length is only 54 inches long
	up to 10 inches less than most modern walk behind floor scrubbers.
	>greater maneuverability and access,
	>small elevators are no longer a limitation
	Stainless steel (ss) fasteners , ss recovery lid, ss control panel, ss hinges,
	tower rollers mounted on a heavy steel bumper, 5 inch (wide) non marking tires for traction,
	heavy steel brush guards all reflect the expensive and durable materials used
	>keep your maintenance costs low.

Tomcat Model 250 Rider Styles

250-13FD	Model 250-26" Disk: (2) 13" Pads or brushes
250-15FD	Model 250-30" Disk: (2) 15" Pads or brushes
250-17FD	Model 250-34" Disk: (2) 17" Pads or brushes

250-25FC	Model 250-24" Cylindrical brushes Available in 4th quarter 2006
250-28FC	Model 250-27" Cylindrical brushes Available in 4th quarter 2006
250-32FC	Model 250-30" Cylindrical brushes Available in 4th quarter 2006

Standard features:

	36-volt / 245 AH Battery Pack, and 25 amp (110-v / 60 Hz) fully automatic charger
	"Central Command II" Energy Management System
	1.0HP All-Gear Front Wheel Drive with solid "Cushion" tire
	35-Gallon Polyethylene Solution Tank
	35-Gallon Polyethylene Recovery Tank and 2" Drain Hose
	Disk: (2) .75 HP / 300 RPM Gear Brush Motors, with (2) brushes (any fiber)
	Up to 250 lbs. Scrubhead Pressure --with 450 pound capacity actuator
	650 Watt Three-Stage Vacuum Motor
	7-Gauge (3/16") All-Steel Frame
	Powder Paint Finish--16 times more corrosion resistant than enamel
	Electric-Actuated Squeegee Suspension with Automatic Up in reverse
	Automatic brush pressure control, with 5 settings from 0 to 250 lbs.
	L.C.D. readout for trouble shooting with diagnostic codes
	L.C.D. readout for solution flow, brush pressure, battery gauge, & (3) hour meters.
	Horn, Headlight and "Uni-Touch" Operation
	Operator & Parts Manual & 100% Stainless Steel Fasteners
	Heavy Duty Tires
	Keyswitch

Productivity enhancements

	20% larger tanks (35 gallon capacity) - Less stopping to refill.
	High scrub pressure ( up to 250 pounds) - Single pass removal of scuff marks.
	Side skirts wrap deck for control over used solution - Dry floor turns reduce "touch up" time.
	Big battery packs (36 volt system) allow up to seven hours of run time -
	Great for larger jobs and stripping floors.

Pricing from $ 11k to $14K Warranty - Tanks:10 years / Parts: 3 years / Labor 1 year