|
| Factory Cat and Tom Cat floor
cleaning machines from the R.P.S. Corp. Made in Racine Wisconsin 
Back to Home
R.P.S. Corporation is a privately owned company that manufactures both the
Factory Cat industrial line and the Tom
Cat line of commercial floor cleaning machines. Based in Racine Wisconsin, they
have produced battery operated equipment since 1989. Known for their
innovative designs and high value products, they have achieved rapid growth
in the two decades. Sold only through distributors, they have had great
influence over the battery operated cleaning machine market. Caliber
Equipment Inc. is unique in that we can represent both the Factory Cat and
the Tom Cat product lines.
A partial list of available models are shown on this page. Click
the high lighted name of the machine to open an additional page of
information on each machine. Click the individual pictures for a
larger view.
Of special note: We provide customers with more Factory Cats, in
terms of individual units, than any other cleaning machine brand.
|
|
Factory Cat model 34 sweeper
(click on blue link for detail and pictures)
A battery operated walk behind dry sweeper
that has the best dust control in our business. Inexpensive and
durable.
|
 |
|
Factory Cat model 48 sweeper
(click on blue link for detail and pictures)
A battery operated rider sweeper that controls
dust and picks up low volumes of debris. With the four batteries option, it
can run continuously for over 6 to 8 hours.
|
 |
| Factory Cat
XR
Series Scrubbers/Sweepers (click on blue link for detail and pictures) The Factory Cat
Line's largest size scrubber or scrubber sweeper.
Ø
Compare the 46 inch scrub
path of an XR model scrubber to smaller scrub path machines that have
similar prices. Wider scrub paths require fewer trips down the aisle to
finish your cleaning job. Part of your cost to complete a job is operator
time. Less operator time to complete a job improves productivity and lowers
your total costs.
Ø
Operator productivity improves
when you require fewer trips across the facility to fill and dump solution
tanks. The large 65 gallon solution tanks offered on the XR offer
you 50% more capacity than the 42 or 45 gallons seen on competitor machines.
Model XR solution tanks will increase operator time actually scrubbing
by 50% over similar scrub path model floor scrubbers. Ultimately the
operator will require less time to complete the task. This lowers your total
costs.
 | 65 gallon tanks |
| 34"-46"scrub path (Disk or Cylindrical) |
| 6 hour run time with 450 ah industrial battery |
High Value! Priced from $18 m to $25 m |
 |
| Factory
Cat-Tomcat model 250 rider scrubber
(click on this blue link for detail and pictures)
Factory Cat's high value compact rider scrubber. It is
designed for maneuverability in tight spaces. Low cost, yet high
in features. This is a 36 volt scrubber with a long run time
capability and high productivity. |
 |
| Magnum (click
on this blue link for detail and pictures) A unique and
versatile design for a walk behind scrubber . The Magnum is packed
with productivity features and high quality materials. Both are
designed to keep your cleaning costs low. Tough for durability.
Smart design
-
Magnum 26" Disk Walk-Behind Scrubber
-
Magnum 30" Disk Walk-Behind Scrubber
-
Magnum 34" Disk Walk-Behind Scrubber
-
Magnum 24" Cylindrical Walk-Behind Scrubber
-
Magnum 27" Cylindrical Walk-Behind Scrubber
-
Magnum 30" Cylindrical Walk-Behind Scrubber
-
Magnum 34" Cylindrical Walk-Behind Scrubber
|
 |
| Mini Mag (click on blue link for detail
and pictures) Factory Cat's- Tomcat's more compact
version of the Magnum. Smaller footprint, lower cost, but fully
featured!
| 170-17FB Mini-17 ( 17" Brush Drive Disk) |
| 170-20FB Mini-20 ( 20" Brush Drive Disk) |
| 170-23FB Mini-23 ( 23" Brush Drive Disk) |
| |
| 170-17FD MiniMag-17 (17" w/ Drive) |
| 170-20FD MiniMag-20 (20" w/ Drive) |
| 170-23FD MiniMag-23 (23" w/ Drive) |
| 170-26FD MiniMag-26 ( Twin 13" Disk w/ Drive) |
| |
| 170-24FC MiniMag-24C ( 24" Cylindrical w/ Drive) |
|
 |
|
Tomcat model 275 battery burnisher -finished floor
polishing machine
(click on blue link for detail and
pictures)
A rider burnisher will increase your
productivity approximately 2.5 times over a walk behind battery operated
burnisher. The pad surface area on a 27 inch burnisher is 82% greater than
the pad surface area on a 20 inch burnisher. A rider burnisher can safely
transport 60% faster (4 mph vs. 2.5 mph) than the average walk behind
burnisher.
|
 |
| |
|
|
©2003-2008 Caliber Equipment, Inc. All
Rights Reserved
Caliber Equipment Factory Cat
Industrial and Commercial Floor Scrubbers |
