Home
About Us
Maintenance Concerns
Cylindrical vs. Disk
Refurbished Machines
Value Machines
American Lincoln
R.P.S. Factory Cat
Nilfisk Advance
MADVAC Vacuums
Rentals
Detergents
Parts & Service
Contact Us

 

New Location

Caliber Equipment, Inc.

11482 Fox Cross Rd.

Ashland, VA 23005

 

E-Mail

Calibereq@aol.com

 

Back to refurbished machines list

Refurbished Machines-an explanation      Not just "used", but rebuilt and reliable. 

(1) Nilfisk Advance C-max 34 automatic scrubber machine.  These are walk behind floor scrubbers for large commercial applications with a maximum coverage rate of 44,388 square feet per hour.  A 34 inch scrub path is provided, with a transport speed from 0 to 290 feet per minute. Available in a disk style brush deck only, it offers hands-free brush mounting and removal for quick changes of pads or different texture brushes.  Touch pad controls provide completely automatic operation. 

Standard features:

bullet

(30) gallon poly recovery tanks.

bullet

(30) gallon solution tanks .

bullet

(2) grit brushes

bullet

Key switch, and Curtis battery discharge indicator.

bullet

Solution flow starts automatically and stops when machine is in neutral.

bullet

Brushes start automatically and "time" off when machine is in neutral.

bullet

Electric actuator positions brush deck and provides a variable down pressure.

bullet

A lever positions the squeegee bar on the floor and the vacuum is started with the brushes.

bullet

Roller protectors on front corners.

bullet

Curved gum rubber industrial squeegee.

Advantages:

  1. The automatic solution control solenoid eliminates the potential for cleaning solution to drain from the machine accidentally.    When manual control valves are left open by mistake, product can be damaged, time is wasted, and a higher chemical expense occurs. In addition, the brushes stop rotating when the machine stops, protecting your floors from unsightly swirl marks.
  2. Scrub brushes have hands free mounting and removal for easy brush rotation and longer life.
  3. Solid 8-gauge unitized steel frame is zinc-plated, yellow cromated and painted to resist rust.
  4. Brush motors are protected by an impact-resistant shroud which can be easily removed for service access.  Large roller column protects the brushes, tank, and your equipment.
  5. Three wheel designs have better maneuverability than four wheel scrubbers.  They pivot on the center wheel for tight turns in narrow aisles, and work best in areas with restricted access.
 
Refurbished C-Max 34 ST   $5395.00

Warranty two months parts and labor

©2003-2008 Caliber Equipment, Inc.  All Rights Reserved

Caliber Equipment Used and Refurbished Industrial and Commercial Floor Scrubbers